Ultrasonic Table Washing Machines, under their fixed collectors in a closed cabin; These are systems where immersion washing and Ultrasonic Washing processes are performed by rotating in one direction.
Baskets or fixtures are designed and made according to the material structure.
Materials are loaded into the machine through the loading-unloading platform.
Washing processes; It is carried out as Spray Washing, Immersion Ultrasonic washing, Immersion Ultrasonic Rinsing, Spray Passivation, High pressure burr breaking, Vacuum and targeted Drying.
With specially designed fixed collectors, every point of the part is effectively cleaned by pressurized spray washing and immersion ultrasonic washing.
Surfaces and holes are scanned and washed with the nozzle lined up on the collector.
Water droplets on the surface are swept away by blowing compressed air with a high-flow fan,
The targeted points are scanned with pressurized hot air to prevent water from remaining in the channels and holes.
With vacuum, the material is allowed to dry in a short time in a moisture-free environment.
The table movement is programmed as one-way motion and fixed.
Hardware Specifications
Spray Washing and Dipping are carried out in the form of Ultrasonic Washing.
Baskets will be selected according to the material.
Depending on the shape of the part, special fixed round and basket applications can be made in the basket.
All operations are carried out in the same cabin with PLC control.
Washing works with recipes created according to the material.
As many recipes as desired can be created.
General Uses
It is used in materials where sensitive surface cleaning or special washing process application is required.
It is used for washing the materials to be loaded in the fixtured basket or with the fixed type.
It is a Washing Machine that can be used to wash all kinds of materials that fit in the washing cabinet.
Even the most sensitive parts can achieve the desired level of cleaning results.
It can be used in accordance with washing processes for Titanium, Aluminum, Brass Material, Cast Materials, Iron and Stainless Steel types.
| FEATURES | DK-900-5P-UC |
|---|---|
| Machine Dimensions (excluding Loading Platform) | Width-2.200 mm – Length- 3.350 mm |
| Height | 3,000 mm |
| Material Loading height | 950 mm |
| Material Loading Weight | 250 Kg |
| Washing Room Basket Dimensions | Rotating Basket Diameter – 800 mm –Height 650 mm |
| One Basket Washing Time | 15 minutes -20 minutes interval |
| Drum Basket Rotation Shape | One-way or Bi-Directional rotation |
| Washing Processes: | |
| 1- Spray Washing and Dip Washing, | Tank- 900 Liters |
| 2- Spray Rinsing, | Tank- 900 Liters |
| 3- Spray Passivation, | Tank- 450 Liters |
| 4-Vacuum and Target Points Drying, | Hot Air Jet |
| Heating Method | Electric Resistance |
| Floppy Oil Skimmer | Standard |
| Centrifugal Cartridge Filter System (50 – 100 – 200 Micron) | Standard |
| Automatic Daily Filter cleaning | Standard |
| Automatic Liquid Level Control | Standard |
| Steam Concentrator system | Standard |
| Material Identification (Laser) Sensor | Standard |
| Washed Material temperature (Laser) measurement | Standard |
| Overflow and waste liquid storage | Standard |
| Pump for overflow and discharge of tanks | Standard |
| Automatic Lubrication System | Standard |
| Target points Drying system | Standard |
| Sliding two-basket loading platform | Standard |
| High Pressure Deburring Pump and system | Optional |
| Automatic Loading Platform | Optional |
| Pure Water Treatment System | Optional |