It is used to break the burrs remaining on the machined surfaces and their edges or to break the corners.
High pressure Burr Crushing Machines work with pressures between 150 bar and 1200 bar.
It works by being programmed to scan the targeted points of their machined surface and corner.
Different recipes are applied according to the structure of each part.
The system is loaded into the cabin by the operator and works fully automatically.
It is possible to design according to each material and desired process.
Fully automatic burring and surface drying operations with air jet are carried out with Movable Slide Table and Part holder systems.
The burr breaking process can be applied to all sensitive points on the part.
| HIGH PRESSURE BURRING | YB-1250- AL-FE |
|---|---|
| Washing Room Basket Dimensions | 1750x1000x750 mm |
| Moving Table Washing capacity | 2 pieces in 40-60 seconds on average |
| Forward-Backward Movement Distance | Length of movement. 1000 mm |
| Material Loading height | 900 mm |
| Washing Processes: | |
| Washing Tank Capacity and Heating | 750 liters. –22.5 kW |
| Return Tank Capacity-and Heating | 500 Liter -15 kW |
| Flushing Pressures AL bar. | Deburring 120 bar-300 bar range |
| Flushing Pressures FE bar. | Deburring Between 400 bar and 1200 bar |
| Nuzul Movement System | Linear guideway and Servo Motor Moving |
| Material Fixation | Movable special locking mechanisms |
| Heating | Resistance |
| Centrifugal Cartridge Filter System (25-50Micron) | Standard |
| Automatic Level Control | Standard |
| Steam Concentrator System | Standard |